20 of 20 search results

SORT ON:

MCS Scan, connector cable
MCS
New

MCS Scan, connector cable

#700800

Stock:Yes

Fits 530807 circuit tester.
Lisle

Lisle, replacement bulb for circuit tester

#530740

Stock:Yes

Replacement for 530814 power / ground outlet, 530802 circuit tester and 530808 circuit tester, low side only.
Lisle

Lisle, replacement bulb

#530734

Stock:Yes

Up to 12V. Protects fingers and automatically centers wire. The little hook to grab a specific wire, and the pointed tip will actually pierce the wire to check for power. Great for confined spaces. With alligator ground clip. Note: See 530739 for replacement bulb.
Lisle

Lisle, Handy Hooker circuit tester

#530800

Stock:Yes

17-piece kit. Used for precise and non damaging diagnostic work. Pins can be used with standard style 4mm banana plug connectors, common with most multimeters. Includes straight, 45° and 90° probes for hard to reach terminals and regular alligator clips. All probes are fully insulated with 30V protection.
Jims

JIMS, Needle Sharp multimeter probe kit

#978616

Stock:Yes

The Noid Light is used to test if the injector receives power and an injection pulse signal. The Noid Light will light up when it gets power and thus lets you diagnose the signal. It will not show if the injector itself is good or bad. Note: See 530735 for replacement probes and 530736 for replacement bulb.
Lisle

Lisle, Noid Light fuel injector tester

#530804

Stock:Yes

Connects to the spark plug wire and allows checking spark jump strength. The larger the gap your spark will jump, the stronger the ignition system is. Spark gap is adjustable from 0 to 10mm. Will allow ignition testing on most motorcycles, watercraft, ATVs & snowmobiles.
Motion Pro

Motion Pro, spark tester

#597943

Stock:Yes

Automotive orientated with ACV/DCV, ACA/DCA, resistance, diode, frequency, continuity, temperature. RPM measurement, dwell reading, duty cycle. Includes inductive pickup/carrying case, thermocouple probe and test leads. Dimensions 9.375" x 8.063" x 3.875" (23.8cm x 20.5cm x 9.8cm).
Lang Tools

Lang Tools, digital multimeter

#516629

Stock:Yes

Basic Heavy Duty. Up to 12V. Fully insulated and comes with reinforced ground clamps. Note: Not intended for computer circuits. Note: See 530739 for replacement bulb.
Lisle

Lisle, Heavy Duty circuit tester basic

#530805

Stock:Yes

247 Series. Screwdriver with non-hardened slotted tip. Used for voltage testing, between 150 to 250 Volt only. Translucent Kraftform handle with carrying clip. Nut size: 0.5mm. Shaft length: 3mm. Handle length: 70mm. Shaft diameter: 3mm. Note: The Wera single pole voltage tester is compatible with 150-250 Volt only. It is not VDE approved and may not be sold in the USA or Canada due to legislative restrictions.
Wera

Wera single-pole voltage tester

#580861

Stock:Yes

Jumbo display; Measures amongst others; AC/DC volts and Amps; Temperature -40 - +1000 Celcius; Frequency; Resistancy; Dwell angle; Includes operating manual; Dimensions of body: 17.5cm high x 8.5cm wide x 3.6cm thick. Note: See 521123 for replacement test leads.
Limit

Limit digital multimeter

#521117

Stock:No

7-piece VDE insulated screwdriver set, with one separate voltage tester for 150-250V only. Other screwdrivers allow working with live wiring up to 1000V, individually tested as per IEC 60900. With multi-component handles. Shafts are Black Point tipped, zinc-phosphated and have reduced diameters, with integrated protective insulation, to allow better access to sunken screws and spring elements (excl. voltage tester). With screwdriver holding rack. Packed in display carton. Kit includes: 2 Phillips screwdrivers. Series 162 iS PH1 x 80mm. Series 162 iS PH2 x 100mm. 1 PlusMinus (Pozidriv/slotted) screwdriver. Series 165 iS PZ/S #2 x 100mm. 4 Slotted screwdrivers. Series 160 iS 0.6 x 3.5 x 100mm. Series 160 iS 0.8 x 4.0 x 100mm. Series 160 iS 1.0 x 5.5 x 125mm. Series 247 0.5 x 3.0 x 70mm. Note: The Wera single pole voltage tester is compatible with 150-250 Volt only. It is not VDE approved and may not be sold in the USA or Canada due to legislative restrictions.
Wera

Wera screwdriver & voltage tester kit 7 pcs. Kraftform Plus

#580862

Stock:No

CatIII DMM. 19 functions, 7 ranges. 600V DC, 600V AC, 10A DC, 10A AC, 20 Ohm, continuity buzzer, diode test, battery test, data hold with auto power-off. Dimensions 9.5" x 6" x 3.75" (24.1cm x 15.2cm x 9.5cm).
Lang Tools

Lang Tools, CATIII digital multimeter

#516631

Stock:Yes

12V AC/DC. Locates shorts and wire breaks. With alligator ground clip. Note: See 530734 for replacement bulb.
Lisle

Lisle, low circuit tester

#530802

Stock:Yes

Fits 530805, 530741 and 530746 circuit testers.
Lisle

Lisle, replacement bulb for circuit tester

#530739

Stock:Yes

Up to 12V. Heavy-Duty version. 2-1 tester, apart from regular testing it can be used, by pressing the red button, as a power outlet / jumper for powering or grounding electrical components. Fully insulated and comes with reinforced ground clamps. Note: Not intended for computer circuits. Note: See 530739 for replacement bulb.
Lisle

Lisle, Heavy Duty circuit tester with jumper wire

#530746

Stock:Yes

Up to 28V. Heavy-Duty version. Heavy Duty coil cord extends 8 feet, letting you check circuits from a distance. Apart from voltage test it will find short circuits, check polarity, detects battery drain. Fully insulated and comes with reinforced ground clamps. Note: Not intended for computer circuits. Note: See 530740 for replacement bulb.
Lisle

Lisle, Ultimate Tester Kit with light & buzzer

#530807

Stock:Yes

Checks low voltage & spark plug wires wile engine is running. The low side checks AC/DC up to 28V. The high side checks spark plug wires, without piercing. Note: 530734 replacement bulb for low side.
Lisle

Lisle, High-Low circuit tester

#530808

Stock:Yes

3-28V. Will not damage sensitive electronics. Draws less then 21 mA at 12V DC. Red light for positive and green light for negative polarity. Note: See 530732 for replacement bulb.
Lisle

Lisle, computer safe circuit tester

#530731

Stock:No

For 530731 circuit tester.
Lisle

Lisle, replacement bulb

#530732

Stock:Yes