20 of 247 search results

SORT ON:

FEULING BEEHIVE brand - Fits Screamin Eagle performance BEEHIVE valve-springs with 0.725" top ID. Includes titanium op collars, retainers and seal kit only. Comes with steel triple groove keepers and Viton valve seals in combination with stock valve guides. Compatible with Screamin Eagle performance BEEHIVE valve-springs with 0.725" top ID only
Feuling
New

Feuling, Ti Retainer Kit For Se Beehive Springs

#707565

Stock:Yes

Titanium top collars. FEULING ECONO performance BEEHIVE valve springs with Ti retainers designed to handle up to 585" lift camshafts at an economical price. These FEULING BEEHIVE springs are made from the same premium stress relieved conical ovate wire as our HIGH LOAD springs but are developed for economical engine budgets. They have an excellent level of fatigue life and are designed to handle the demands of performance engines with 585" and smaller lift camshafts. Dyno proven and track tested. FEULING BEEHIVE valve spring kits are each hand measured and labeled specifically based on their coil bind / required open height. Our kits require you to measure installed height and may require use of included shims. This is so you can set up the springs specifically to your camshaft lift for quieter and smoother performance. Similar to tuning your suspension to your weight and riding style. • FEULING BEEHIVE valve springs use a much smaller and lighter weight retainer which drastically reduces the valve weight creating a much quicker revving and smoother motion than comparable dual valve springs. • FEULING ECONO springs allow up to 585" lift cams, no rocker box clearancing required. • Eliminate valve spring separation, maximize stability, reduce valve-train noise & harmonics! • Available for 5/16" and 7mm valves Kits include: FEULING ECONO BEEHIVE valve springs, lightweight 7 Degreesteel retainers, machined heat treated chrome moly spring seats, seat shims, valve locks and a set of premium Viton valve seals equipped with a spring loaded valve stem wiper system. Don’t get stung by inferior valve springs! Quicker Revving - Smoother Motion - Fit up to 585" Lift Camshafts SEAT Lbs. / INSTALLED HEIGHT 183 Lbs. @ 1.760" (0.510" Lift) 175 Lbs. @ 1.785" (0.535" Lift) 172 Lbs @ 1.803" (0.553" Lift) 165 Lbs @ 1.825" (0.574" Lift) 163 Lbs @ 1.835" (0.585" Lift) 380 Lbs @ 1.250" OPEN HEIGHT Coil Bind @ 1.180"
Feuling
New

Feuling, Econo beehive valve spring kit . 585" lift

#707563

Stock:Yes

Titanium top collars. FEULING ECONO performance BEEHIVE valve springs with Titanium retainers designed to handle up to 585" lift camshafts at an economical price. These FEULING BEEHIVE springs are made from the same premium stress relieved conical ovate wire as our HIGH LOAD springs but are developed for economical engine budgets. They have an excellent level of fatigue life and are designed to handle the demands of performance engines with 585" and smaller lift camshafts. Dyno proven and track tested. FEULING BEEHIVE valve spring kits are each hand measured and labeled specifically based on their coil bind / required open height. Our kits require you to measure installed height and may require use of included shims. This is so you can set up the springs specifically to your camshaft lift for quieter and smoother performance. Similar to tuning your suspension to your weight and riding style. • FEULING BEEHIVE valve springs use a much smaller and lighter weight retainer which drastically reduces the valve weight creating a much quicker revving and smoother motion than comparable dual valve springs. • FEULING ECONO springs allow up to 585" lift cams, no rocker box clearancing required. • Eliminate valve spring separation, maximize stability, reduce valve-train noise & harmonics! • Available for 5/16" and 7mm valves Kits include: FEULING ECONO BEEHIVE valve springs, lightweight 7 Degree Ti retainers, machined heat treated chrome moly spring seats, seat shims, valve locks and a set of premium Viton valve seals equipped with a spring loaded valve stem wiper system. Don’t get stung by inferior valve springs! Quicker Revving - Smoother Motion - Fit up to 585" Lift Camshafts SEAT Lbs. / INSTALLED HEIGHT 183 Lbs. @ 1.760" (0.510" Lift) 175 Lbs. @ 1.785" (0.535" Lift) 172 Lbs @ 1.803" (0.553" Lift) 165 Lbs @ 1.825" (0.574" Lift) 163 Lbs @ 1.835" (0.585" Lift) 380 Lbs @ 1.250" OPEN HEIGHT Coil Bind @ 1.180"
Feuling
New

Feuling, Econo Beehive spring kit, Ti top collars. 585" lift

#707562

Stock:Yes

FEULING BEEHIVE brand - Fits Screamin Eagle performance BEEHIVE valve-springs with 0.725" top ID. Allows installation of the Screamin Eagle performance BEEHIVE valve-springs with 0.725" top ID onto the early style 5/16" valve stem cylinder heads. Includes Titanium retainers (top collars), standard height steel valve keys, machined steel spring seats (lower collars) and Viton valve seals for use with stock valve guides.
Feuling
New

Feuling, Ti retainer kit For SE Beehive springs

#707566

Stock:Yes

Must reuse OEM steel upper spring collars. Installed pressure 134lbs@1.375" (0.405 lift), 103 lbs@1.520" (0.550 lift), coil bind@.920". Direct replacement, installs without machining or rocker box clearancing. High tensile chrome silicone wire with a shot-peened heat treatment and a super NexTex® finish. Kits include springs, lower collars, no upper collars, shims, keys and Viton® seals.
Feuling
New

Feuling, Endurance Beehive valve spring kit. 565" lift Re-us

#993530

Stock:Yes

Stock height. These valve spring top collars (Upper valve spring retainers) come in a 8-pack and are compatible with stock components, Screamin' Eagle and Feuling 993530 Beehive valve spring kit. As strong as the steel but much lighter to help prevent valve float when you turn on the heat. OEM replacement reference 18100045
Feuling
New

Feuling, M8 titanium top valve spring collar set. STD

#707560

Stock:Yes

+ .050" installed height. Increases installed height, allowing the use of a higher lift camshaft without the need for removing/cutting valve spring seat pockets/depths. Keeps the valve spring pressure in the proper open height specifications. These valve spring top collars (Upper valve spring retainers) come in a 8-pack and are compatible with stock, Screamin' Eagle and Feuling's 993530 and 588022 Beehive valve spring kits. As strong as the steel but much lighter to help prevent valve float when you turn on the heat. Custom replacement for the stock 18100045 valve spring top collars.
Feuling
New

Feuling, M8 titanium top valve spring collar set +.050"

#707564

Stock:Yes

- .050" lower Lowers the installed height, allowing the use of smaller lift camshafts. Keeps the valve spring pressure in the proper open height specifications. These valve spring top collars (Upper valve spring retainers) come in a 8-pack and are compatible with stock, Screamin' Eagle and Feuling 993530 Beehive valve spring kits. As strong as the steel but much lighter to help prevent valve float when you turn on the heat. Custom replacement for the stock 18100045 valve spring top collars.
Feuling
New

Feuling, M8 titanium top valve spring collar set -0.050"

#707561

Stock:Yes

High quality Viton valve seals designed to handle high engine temperatures with a built in spring loaded wiper to clean excess oil from valve stem with minimal friction. Includes 8 seals. OEM replacement reference 18687-01K.
Feuling
New

Feuling, V-Rod Viton valve seals set

#707753

Stock:No

T-6 lightweight aluminum, blue anodized. Used in high lift, up to .600" valve lift, applications. Allows cam grinds C, D, M, 9, 10, Z, 3 to be installed without machine work. Note: See 503550 for required matching Andrews .600" high lift valve springs.
Andrews

Andrews, top collar set. Aluminum. .600" lift

#503535

Stock:Yes

Heat treated steel. Lower collars, steel. Low profile, allows +.060" more valve spring travel. Simular to the OEM 80-84 collars that use guides with K-style stem seals.
Andrews

Andrews, lower spring collar set. Steel. +.060" lift

#503545

Stock:Yes

Vulcanized fiber washer. 4 washers used. OEM replacement reference 18259-52.
James Gaskets

James, lower valve spring cover washer

#526202

Stock:Yes

Viton rubber. Fits stock .625" O.D. valve guides. Valve stem seals can be used, and are recommended, on all applications. They will help control oil consumption in any type H-D engine. OEM replacement reference 18000-81.
Cometic

Cometic, valve guide seals. Viton

#561817

Stock:Yes

Fits OEM & KPMI 7° angled top collars. Includes 4 pairs of valve keepers, to service one engine. Stock replacement for OEM 6mm valve stems. OEM replacement reference 18100060
Kibblewhite

KPMI, valve key set. For OEM top collars

#588728

Stock:Yes

Cast Iron offers maximum durability and wear resistance for long distance touring. The standard since the invention of the piston engine. Note: Standard non-oversize dimensions (for reference only) are 0.4750" O.D. (12.07mm); 0.2342" I.D. (5.95mm); 1.655" OAL (42.04mm).
Kibblewhite
Discontinued

KPMI, exhaust valve guide. Cast iron. +.010"

#588722

Stock:Yes

OEM style valve keepers. Replacement for stock 6mm valve stems. Incl. 8 pairs to service one engine. OEM replacement reference 18100060
Feuling

Feuling, OEM style valve key set. 6mm

#588023

Stock:Yes

Comes with steel top collars, steel lower, shims, triple-spring valve springs and valve keys/valve keepers.
S&S

S&S, valve spring kit. Steel top collars .590" lift

#900258

Stock:Yes

With lash cap recess. A lash cap recess allows the installation of a steel lash cap on top of the valve stem for when titanium valves are used. With OEM 10° valve collar angle. Designed for use in combination with JIMS titanium valves.
Jims

JIMS, 10 degree lash cap recess valve keys

#978098

Stock:Yes

Compatible with 1.437" - 1.500" spring diameter. 10° angled for OEM H-D fitment. Fits double springs with damper. Fits all valve stem sizes. Titanium is as strong as steel and still offers a 50% weight reduction.
Jims

JIMS, upper valve spring collars. Titanium

#978090

Stock:Yes

Compatible with 1.500" - 1.550" spring diameter. 10° angled for OEM H-D fitment. Fits double springs with damper. Fits all valve stem sizes.
Jims

JIMS, upper valve spring collar set. Chromoly

#978094

Stock:Yes