20 of 87 search results

SORT ON:

FEULING BEEHIVE brand - Fits Screamin Eagle performance BEEHIVE valve-springs with 0.725" top ID. Includes titanium op collars, retainers and seal kit only. Comes with steel triple groove keepers and Viton valve seals in combination with stock valve guides. Compatible with Screamin Eagle performance BEEHIVE valve-springs with 0.725" top ID only
Feuling
New

Feuling, Ti Retainer Kit For Se Beehive Springs

#707565

Stock:Yes

Titanium top collars. FEULING ECONO performance BEEHIVE valve springs with Ti retainers designed to handle up to 585" lift camshafts at an economical price. These FEULING BEEHIVE springs are made from the same premium stress relieved conical ovate wire as our HIGH LOAD springs but are developed for economical engine budgets. They have an excellent level of fatigue life and are designed to handle the demands of performance engines with 585" and smaller lift camshafts. Dyno proven and track tested. FEULING BEEHIVE valve spring kits are each hand measured and labeled specifically based on their coil bind / required open height. Our kits require you to measure installed height and may require use of included shims. This is so you can set up the springs specifically to your camshaft lift for quieter and smoother performance. Similar to tuning your suspension to your weight and riding style. • FEULING BEEHIVE valve springs use a much smaller and lighter weight retainer which drastically reduces the valve weight creating a much quicker revving and smoother motion than comparable dual valve springs. • FEULING ECONO springs allow up to 585" lift cams, no rocker box clearancing required. • Eliminate valve spring separation, maximize stability, reduce valve-train noise & harmonics! • Available for 5/16" and 7mm valves Kits include: FEULING ECONO BEEHIVE valve springs, lightweight 7 Degreesteel retainers, machined heat treated chrome moly spring seats, seat shims, valve locks and a set of premium Viton valve seals equipped with a spring loaded valve stem wiper system. Don’t get stung by inferior valve springs! Quicker Revving - Smoother Motion - Fit up to 585" Lift Camshafts SEAT Lbs. / INSTALLED HEIGHT 183 Lbs. @ 1.760" (0.510" Lift) 175 Lbs. @ 1.785" (0.535" Lift) 172 Lbs @ 1.803" (0.553" Lift) 165 Lbs @ 1.825" (0.574" Lift) 163 Lbs @ 1.835" (0.585" Lift) 380 Lbs @ 1.250" OPEN HEIGHT Coil Bind @ 1.180"
Feuling
New

Feuling, Econo beehive valve spring kit . 585" lift

#707563

Stock:Yes

Titanium top collars. FEULING ECONO performance BEEHIVE valve springs with Titanium retainers designed to handle up to 585" lift camshafts at an economical price. These FEULING BEEHIVE springs are made from the same premium stress relieved conical ovate wire as our HIGH LOAD springs but are developed for economical engine budgets. They have an excellent level of fatigue life and are designed to handle the demands of performance engines with 585" and smaller lift camshafts. Dyno proven and track tested. FEULING BEEHIVE valve spring kits are each hand measured and labeled specifically based on their coil bind / required open height. Our kits require you to measure installed height and may require use of included shims. This is so you can set up the springs specifically to your camshaft lift for quieter and smoother performance. Similar to tuning your suspension to your weight and riding style. • FEULING BEEHIVE valve springs use a much smaller and lighter weight retainer which drastically reduces the valve weight creating a much quicker revving and smoother motion than comparable dual valve springs. • FEULING ECONO springs allow up to 585" lift cams, no rocker box clearancing required. • Eliminate valve spring separation, maximize stability, reduce valve-train noise & harmonics! • Available for 5/16" and 7mm valves Kits include: FEULING ECONO BEEHIVE valve springs, lightweight 7 Degree Ti retainers, machined heat treated chrome moly spring seats, seat shims, valve locks and a set of premium Viton valve seals equipped with a spring loaded valve stem wiper system. Don’t get stung by inferior valve springs! Quicker Revving - Smoother Motion - Fit up to 585" Lift Camshafts SEAT Lbs. / INSTALLED HEIGHT 183 Lbs. @ 1.760" (0.510" Lift) 175 Lbs. @ 1.785" (0.535" Lift) 172 Lbs @ 1.803" (0.553" Lift) 165 Lbs @ 1.825" (0.574" Lift) 163 Lbs @ 1.835" (0.585" Lift) 380 Lbs @ 1.250" OPEN HEIGHT Coil Bind @ 1.180"
Feuling
New

Feuling, Econo Beehive spring kit, Ti top collars. 585" lift

#707562

Stock:Yes

FEULING BEEHIVE brand - Fits Screamin Eagle performance BEEHIVE valve-springs with 0.725" top ID. Allows installation of the Screamin Eagle performance BEEHIVE valve-springs with 0.725" top ID onto the early style 5/16" valve stem cylinder heads. Includes Titanium retainers (top collars), standard height steel valve keys, machined steel spring seats (lower collars) and Viton valve seals for use with stock valve guides.
Feuling
New

Feuling, Ti retainer kit For SE Beehive springs

#707566

Stock:Yes

Must reuse OEM steel upper spring collars. Installed pressure 134lbs@1.375" (0.405 lift), 103 lbs@1.520" (0.550 lift), coil bind@.920". Direct replacement, installs without machining or rocker box clearancing. High tensile chrome silicone wire with a shot-peened heat treatment and a super NexTex® finish. Kits include springs, lower collars, no upper collars, shims, keys and Viton® seals.
Feuling
New

Feuling, Endurance Beehive valve spring kit. 565" lift Re-us

#993530

Stock:Yes

+ .050" installed height. Increases installed height, allowing the use of a higher lift camshaft without the need for removing/cutting valve spring seat pockets/depths. Keeps the valve spring pressure in the proper open height specifications. These valve spring top collars (Upper valve spring retainers) come in a 8-pack and are compatible with stock, Screamin' Eagle and Feuling's 993530 and 588022 Beehive valve spring kits. As strong as the steel but much lighter to help prevent valve float when you turn on the heat. Custom replacement for the stock 18100045 valve spring top collars.
Feuling
New

Feuling, M8 titanium top valve spring collar set +.050"

#707564

Stock:Yes

Stock height. These valve spring top collars (Upper valve spring retainers) come in a 8-pack and are compatible with stock components, Screamin' Eagle and Feuling 993530 Beehive valve spring kit. As strong as the steel but much lighter to help prevent valve float when you turn on the heat. OEM replacement reference 18100045
Feuling
New

Feuling, M8 titanium top valve spring collar set. STD

#707560

Stock:Yes

- .050" lower Lowers the installed height, allowing the use of smaller lift camshafts. Keeps the valve spring pressure in the proper open height specifications. These valve spring top collars (Upper valve spring retainers) come in a 8-pack and are compatible with stock, Screamin' Eagle and Feuling 993530 Beehive valve spring kits. As strong as the steel but much lighter to help prevent valve float when you turn on the heat. Custom replacement for the stock 18100045 valve spring top collars.
Feuling
New

Feuling, M8 titanium top valve spring collar set -0.050"

#707561

Stock:Yes

Vulcanized fiber washer. 4 washers used. OEM replacement reference 18259-52.
James Gaskets

James, lower valve spring cover washer

#526202

Stock:Yes

Comes with steel top collars, steel lower, shims, triple-spring valve springs and valve keys/valve keepers.
S&S

S&S, valve spring kit. Steel top collars .590" lift

#900258

Stock:Yes

For Screamin' Eagle heads. Installed pressure 217lbs@1.789", open pressure & height 415lbs@1.215", coil bind@1.125". Direct replacement, installs without machining or rocker box clearancing. High tensile chrome silicone wire with a shot-peened heat treatment and a super NexTex® finish. Kits include springs, lower collars, titanium upper collars, shims, keys and Viton® seals.
Feuling

Feuling, High Load Beehive valve spring kit. .750" lift

#566039

Stock:Yes

Kit includes aluminum top collars and valve springs. High performance spring kit that can be used in all applications from stock to .550" lift cams. Note: Lower collars and valve keys / valve keepers must be re-used. Note: Panhead may require clearancing between rocker cover and top collar. Note: L81-84 Shovelhead must use stock style lower collars (18222-81) or purchase them separately as MCS 982281.
S&S

S&S, valve spring kit. STD to .550" lift

#900242

Stock:Yes

.550" lift is used on S&S heads for Shovel produced before november 2000. Later heads, with a production date after nov. 2000 comes with a .590" lift spring kit.
S&S

S&S, inner valve spring .550" lift

#951084

Stock:Yes

.550" lift is used on S&S heads for Shovel produced before november 2000. Later heads, with a production date after nov. 2000 comes with a .590" lift spring kit.
S&S

S&S, outer valve spring .550" lift

#951085

Stock:Yes

Reduces total valve train mass. Great for racing high lift performance builds. The springs are manufactured from the highest quality clean chrome silicone wire, shot peened and heat treated for maximum fatigue life. Kit includes springs, upper collars, lower collars, and valve keys. Max valve lift: .480". Installed height: 1.310". Seat pressure 158 lbs. Open pressure: 340 lbs. @ .480" valve lift. Note: Kit must be used with Kibblewhite Precision engineering (KPMI) valve guides. Stock dimensions valve guides must be shortened. Valve guide machining instructions are included with this kit.
Kibblewhite

KPMI, valve spring kit. .460" lift. Steel top collars

#524452

Stock:Yes

High performance valve spring kit. Includes steel top collars, lower collars, valve springs and valve keys. Fits stock Knuckleheads, S&S Knucklehead tins and all S&S KN (Knucklehead) style engines. Note: OEM valve guides may require shortening.
S&S

S&S, valve spring kit. STD to .480" valve lift

#531960

Stock:Yes

Stock replacement, use 524463 top collar & valve key set
Kibblewhite

Kpmi, Sportster valve spring set

#524462

Stock:Yes

.020" paper washer. OEM replacement reference 18259-39, 175-39C.
James Gaskets

James, washer spring cover

#518301

Stock:Yes

Low profile for +.050" spring travel. Chromoly, black oxided. Precision re-engineered to offer installation advantages and manufactured of special heat treated chromoly material that has been black oxided. Will fit OEM, Manley and many aftermarket manufacturers valve springs.
Manley

Manley, lower valve spring collar set. +.050"

#513782

Stock:Yes

Low profile for +.030" spring travel. Chromoly, black oxided. Precision re-engineered to offer installation advantages and manufactured of special heat treated chromoly material that has been black oxided. Will fit OEM, Manley and many aftermarket manufacturers valve springs.
Manley

Manley, lower valve spring collar set. +.030"

#513787

Stock:Yes