20 of 39 search results

SORT ON:

Prevents clutch hub from rotating when installing/removing clutch hub nut.
Jims

JIMS, clutch shell lock tool

#978344

Stock:Yes

Used to counterbore OEM clutch baskets to install the 46/49 tooth Evolution Industries basket sprocket & ring kits
Evolution Industries

Evolution Industries, counter bore tool

#552032

Stock:Yes

Tool to help install and remove the clutch spring retaining ring. Note: See 970347 for the optional adapter nut that is required for this tool to function on XL Sportster and Buell models.
Jims

JIMS, clutch spring compressor tool

#960967

Stock:Yes

Used to lock the clutch hub assembly in place when removing and installing the clutch hub nut
Jims

JIMS, clutch hub locking tool

#961436

Stock:No

Used to assemble and disassembly the clutch hub assembly. Also installs & removes the ball bearing (MCS 518779 / OEM 37906-90) from the clutch shell/basket without damage to the new bearing by pushing on the outside perimeter of the bearing.
Jims

JIMS, clutch hub & basket tool

#978507

Stock:Yes

Used to align the clutch plates during assembly of the clutch basket.
Jims

JIMS, V-Rod clutch plate alignment tool

#978446

Stock:Yes

Used to compress clutch springs on Sportster models. OEM style replacement for 97178-71 tool.
Jims

JIMS, clutch spring compressor tool

#900558

Stock:Yes

Used to hold clutch shell from turning, when clutch hub nut, engine and transmission sprockets are removed or installed.
Barnett

Barnett, clutch basket lock plate

#905659

Stock:Yes

Use to remove clutch hub from the transmission mainshaft. Slight tap onto the transmission mainshaft to remove clutch hub. Left-hand thread.
MCS

MCS, clutch hub removal tool

#925573

Stock:Yes

For use with 979429 clutch spring compressor tool. Makes 979429 compatible with XL Sportster and Buell models.
George's Garage

George's Garage, clutch spring adapter nut

#979430

Stock:Yes

Used with Barnett Scorpion clutches only. Designed to lock the outer clutch basket to the inner clutch hub.
Barnett

Barnett, Scorpion clutch hub lock plate tool

#905657

Stock:Yes

Complete tool set to assemble and disassembly the clutch shell assembly. Used to install and remove the double row clutch shell ball bearing 37906-90 (MCS 518779). Installs without any damage to the new bearing.
MCS

MCS, clutch bearing tool set

#925567

Stock:Yes

Used to ream upper (33291-36) and lower (33290-38) bushings of the clutch finger shaft (37074-38A), as used in the kickstart cover (transmission end cover) of 4-speed Big Twins, to factory specs.
MCS

Adjustable reamer tool, clutch release shaft

#530865

Stock:No

Used to release clutch spring for removal and installation of retaining ring. Note: Order 979430 adapter separately for use on XL Sportster models.
George's Garage

George's Garage, clutch spring compressor

#979429

Stock:Yes

Used with Barnett Scorpion clutches only. Designed to lock the outer clutch basket to the inner clutch hub.
Barnett

Barnett, Scorpion clutch hub lock plate tool

#905656

Stock:Yes

Used to allow easy removal of pressure plate without removing the OEM (coil style) clutch springs and clutch spring retainer. Allows these parts to be removed and installed as one unit without requiring re-installing of the clutch springs and additional spring adjustments. Self centering design.
Barnett

Barnett, clutch spring removal tool

#905662

Stock:No

Fits all Scorpion clutch hubs, excl. 71-83 XL models. Billet aluminum with 7/16" hex bolt with protection cap. Will not damage mainshaft.
Barnett

Barnett, Scorpion clutch hub puller tool

#905658

Stock:No

Enables holding/tightening the mainshaft (jam)nut while adjusting/holding the pushrod adjuster screw in the correct position with the supplied allen wrench / hex key.
Jims

JIMS, clutch jam nut adjusting tool

#978645

Stock:Yes

Deep socket design allows this socket to access the lock nut of the clutch adjuster. The hole allows final adjustment and a correct position-hold with an allen wrench / hex key, after which the locknut can be tightened. Comes with a 11/16" hex nut drive.
MCS

MCS, clutch adjusting tool

#925548

Stock:No

This tool securely holds clutch hubs on most motorcycles and ATVs. It can be used to remove the locking ring on UTV fuel cells to remove fuel pumps - Reversible blades work on conventional square spline and on round spline style (KTM/Husqvarna) clutch hubs - Aircraft grade billet aluminum body with durable blue anodized finish - Precision machined stainless steel blades are strong and durable - Billet aluminum clamp knob for fast and easy installation and removal - Extended knurled handle provides sure grip when removing or torquing the clutch hub nut - Tool jaws have a range of 75mm (2.9") to 120mm (4.72")
Motion Pro

Motion Pro, heavy duty clutch holding tool

#954364

Stock:Yes