20 of 270 search results

SORT ON:

Used to install spiral lock / Spiro lock (circular flat wire) 22582-52 style wristpin retaining rings to 0.515" ID wristpins. Easy install without bending or distorting the retaining ring. Note: Will not work with 'round wire' or 'E-clip' type retaining rings.
MCS
New

MCS, wrist pin lock ring tool

#987922

Stock:Yes

Used to align rocker boxes correctly and prevents them from shifting when being tightened. Helps prevent misalignment that may cause leaks.
MCS
New

MCS, rocker box alignment tool

#987921

Stock:Yes

Lost or broke your screw-on adapter for your compression tester? - Used between the tubing of a compression tester/leak down tester and the cylinder head - With 5/16" / 8mm sized hose end - Threaded end is 12mm x 1.25 - Fits most 12mm threaded cylinder heads
MCS
New

MCS, adapter compression tester. 12mm

#987925

Stock:Yes

Used to install spiral lock / Spiro lock (circular flat wire) style wristpin retaining rings to 0.535" ID wristpins. Easy install without bending or distorting the retaining ring. Note: Will not work with 'round wire' or 'E-clip' type retaining rings.
MCS
New

MCS, wrist pin lock ring tool

#987923

Stock:Yes

Optional adapter for MCS 998141 valve spring compressor tool. Will allow working with M8 valve springs
MCS
New

MCS, M8 valve spring collar

#998143

Stock:Yes

Replaces the factory Screamin' Eagle cylinder heads plates, heavy duty sticky tape glues plates onto the factory plates on SE cylinder heads. Note: Special Order Product only. To order please contact your MCS sales representative.
Feuling
New

Feuling, M8 Cylinder Head Plates

#707292

Stock:No

Gauge to exactly measure installed spring height. Place tool on cylinder head in place of valve spring with spring cup and retainer in place, twist measuring tool to get accurate spring height measurement. Note: Special Order Product only. To order please contact your MCS sales representative.
Feuling
New

Feuling, installed valve spring height tool

#707267

Stock:No

Pilot for valve guide height cutter 707271. For use with 5/16" (7.9375mm) valve stems Note: Special Order Product only. To order please contact your MCS sales representative.
Feuling
New

Feuling, pilot for valve guide top cutter. 5/16"

#707272

Stock:No

Pilot for valve guide height cutter 707271. For use with 7mm valve stems Note: Special Order Product only. To order please contact your MCS sales representative.
Feuling
New

Feuling, pilot for valve guide top cutter. 7mm

#707273

Stock:No

Used to cut the top of the valve guide, to increase clearance between bottom of valve spring retainer and top of valve guide seal. Uses pilots 707272 (5/16" stem) or 707273 (7mm stem), which must be ordered separately. Note: Special Order Product only. To order please contact your MCS sales representative.
Feuling
New

Feuling, valve guide height cutter

#707271

Stock:No

Fits valve guides with 5/16" (7.9375mm) valve stem. Cutter bodies and pilots are interchangeable, Hardened pilots fit all 3/8 and ½ hand drills. Valve seat spring cutters: - 707258 .625" ID x 1.565" OD - 707259 .625" ID x 1.635" OD - 707260 .625" ID x 1.750" OD - 707261 .550" ID x 1.180" OD. Cutter uses the following Pilots: - 707265 Fits valve guides with 3/8" ( 9.53mm) valve stem, 48-83 Pan & Shovel - 707263 Fits valve guides with 5/16" (7.9375mm) valve stem, 84-99 Evo B.T.; 99-04 Twin Cam and 86-22 Evo XL - 707264 Fits valve guides with 7mm valve stem, 05-17 Twin Cam - 707262 Fits valve guides with 6mm valve stem, 17-up M8 - 707266 Fits valve guides with 11/32" (7.7313mm) valve stem. Valve guide OD cutters: Used to cut the valve guide outer to correct outer diameter. - 707268 .420" OD for Feuling seals 566045 (84-99 Evo Big Twin; 99-04 Twin Cam; 86-03 XL Sportster) - 707269 .500' OD for Feuling seals 566048 (.500" OD guides with 5/16" stems) - 707270 .530" OD for Feuling seals 566047 (H-D with Screamin' Eagle cylinder heads with .530" OD guides with 5/16" stems). Note: Special Order Product only. To order please contact your MCS sales representative.
Feuling
New

Feuling, pilot for valve spring seat cutter, 5/16"

#707263

Stock:No

Used to cut the valve guide outer to correct outer diameter. Cuts to .530" OD for Feuling seals 566047 (H-D with Screamin' Eagle cylinder heads with .530" OD guides with 5/16" stems). Valve guide OD cutters: Used to cut the valve guide outer to correct outer diameter. - 707268 .420" OD for Feuling seals 566045 (84-99 Evo Big Twin; 99-04 Twin Cam; 86-03 XL Sportster) - 707269 .500' OD for Feuling seals 566048 (.500" OD guides with 5/16" stems) - 707270 .530" OD for Feuling seals 566047 (H-D with Screamin' Eagle cylinder heads with .530" OD guides with 5/16" stems). Valve seat spring cutters: - 707258 .625" ID x 1.565" OD - 707259 .625" ID x 1.635" OD - 707260 .625" ID x 1.750" OD - 707261 .550" ID x 1.180" OD. Cutter uses the following Pilots: - 707265 Fits valve guides with 3/8" ( 9.53mm) valve stem, 48-83 Pan & Shovel - 707263 Fits valve guides with 5/16" (7.9375mm) valve stem, 84-99 Evo B.T.; 99-04 Twin Cam and 86-22 Evo XL - 707264 Fits valve guides with 7mm valve stem, 05-17 Twin Cam - 707262 Fits valve guides with 6mm valve stem, 17-up M8 - 707266 Fits valve guides with 11/32" (7.7313mm) valve stem. Note: Special Order Product only. To order please contact your MCS sales representative.
Feuling
New

Feuling, valve guide OD cutter for 566047 seals

#707270

Stock:No

Fits valve guides with 3/8" ( 9.53mm) valve stem. Cutter bodies and pilots are interchangeable, Hardened pilots fit all 3/8 and ½ hand drills. Valve seat spring cutters: - 707258 .625" ID x 1.565" OD - 707259 .625" ID x 1.635" OD - 707260 .625" ID x 1.750" OD - 707261 .550" ID x 1.180" OD. Cutter uses the following Pilots: - 707265 Fits valve guides with 3/8" ( 9.53mm) valve stem, 48-83 Pan & Shovel - 707263 Fits valve guides with 5/16" (7.9375mm) valve stem, 84-99 Evo B.T.; 99-04 Twin Cam and 86-22 Evo XL - 707264 Fits valve guides with 7mm valve stem, 05-17 Twin Cam - 707262 Fits valve guides with 6mm valve stem, 17-up M8 - 707266 Fits valve guides with 11/32" (7.7313mm) valve stem. Valve guide OD cutters: Used to cut the valve guide outer to correct outer diameter. - 707268 .420" OD for Feuling seals 566045 (84-99 Evo Big Twin; 99-04 Twin Cam; 86-03 XL Sportster) - 707269 .500' OD for Feuling seals 566048 (.500" OD guides with 5/16" stems) - 707270 .530" OD for Feuling seals 566047 (H-D with Screamin' Eagle cylinder heads with .530" OD guides with 5/16" stems). Note: Special Order Product only. To order please contact your MCS sales representative.
Feuling
New

Feuling, pilot for valve spring seat cutter, 3/8"

#707265

Stock:No

Fits valve guides with 6mm valve stem. Cutter bodies and pilots are interchangeable, Hardened pilots fit all 3/8 and ½ hand drills. Valve seat spring cutters: - 707258 .625" ID x 1.565" OD - 707259 .625" ID x 1.635" OD - 707260 .625" ID x 1.750" OD - 707261 .550" ID x 1.180" OD. Cutter uses the following Pilots: - 707265 Fits valve guides with 3/8" ( 9.53mm) valve stem, 48-83 Pan & Shovel - 707263 Fits valve guides with 5/16" (7.9375mm) valve stem, 84-99 Evo B.T.; 99-04 Twin Cam and 86-22 Evo XL - 707264 Fits valve guides with 7mm valve stem, 05-17 Twin Cam - 707262 Fits valve guides with 6mm valve stem, 17-up M8 - 707266 Fits valve guides with 11/32" (7.7313mm) valve stem. Valve guide OD cutters: Used to cut the valve guide outer to correct outer diameter. - 707268 .420" OD for Feuling seals 566045 (84-99 Evo Big Twin; 99-04 Twin Cam; 86-03 XL Sportster) - 707269 .500' OD for Feuling seals 566048 (.500" OD guides with 5/16" stems) - 707270 .530" OD for Feuling seals 566047 (H-D with Screamin' Eagle cylinder heads with .530" OD guides with 5/16" stems). Note: Special Order Product only. To order please contact your MCS sales representative.
Feuling
New

Feuling, pilot for valve spring seat cutter, 6mm

#707262

Stock:No

Fits valve guides with 7mm valve stem. Cutter bodies and pilots are interchangeable, Hardened pilots fit all 3/8 and ½ hand drills. Valve seat spring cutters: - 707258 .625" ID x 1.565" OD - 707259 .625" ID x 1.635" OD - 707260 .625" ID x 1.750" OD - 707261 .550" ID x 1.180" OD. Cutter uses the following Pilots: - 707265 Fits valve guides with 3/8" ( 9.53mm) valve stem, 48-83 Pan & Shovel - 707263 Fits valve guides with 5/16" (7.9375mm) valve stem, 84-99 Evo B.T.; 99-04 Twin Cam and 86-22 Evo XL - 707264 Fits valve guides with 7mm valve stem, 05-17 Twin Cam - 707262 Fits valve guides with 6mm valve stem, 17-up M8 - 707266 Fits valve guides with 11/32" (7.7313mm) valve stem. Valve guide OD cutters: Used to cut the valve guide outer to correct outer diameter. - 707268 .420" OD for Feuling seals 566045 (84-99 Evo Big Twin; 99-04 Twin Cam; 86-03 XL Sportster) - 707269 .500' OD for Feuling seals 566048 (.500" OD guides with 5/16" stems) - 707270 .530" OD for Feuling seals 566047 (H-D with Screamin' Eagle cylinder heads with .530" OD guides with 5/16" stems). Note: Special Order Product only. To order please contact your MCS sales representative.
Feuling
New

Feuling, pilot for valve spring seat cutter, 7mm

#707264

Stock:No

Used to cut the valve guide outer to correct outer diameter. Cuts to .420" OD for Feuling seals 566045 (84-99 Evo Big Twin; 99-04 Twin Cam; 86-03 XL Sportster). Valve guide OD cutters: Used to cut the valve guide outer to correct outer diameter. - 707268 .420" OD for Feuling seals 566045 (84-99 Evo Big Twin; 99-04 Twin Cam; 86-03 XL Sportster) - 707269 .500' OD for Feuling seals 566048 (.500" OD guides with 5/16" stems) - 707270 .530" OD for Feuling seals 566047 (H-D with Screamin' Eagle cylinder heads with .530" OD guides with 5/16" stems). Valve seat spring cutters: - 707258 .625" ID x 1.565" OD - 707259 .625" ID x 1.635" OD - 707260 .625" ID x 1.750" OD - 707261 .550" ID x 1.180" OD. Cutter uses the following Pilots: - 707265 Fits valve guides with 3/8" ( 9.53mm) valve stem, 48-83 Pan & Shovel - 707263 Fits valve guides with 5/16" (7.9375mm) valve stem, 84-99 Evo B.T.; 99-04 Twin Cam and 86-22 Evo XL - 707264 Fits valve guides with 7mm valve stem, 05-17 Twin Cam - 707262 Fits valve guides with 6mm valve stem, 17-up M8 - 707266 Fits valve guides with 11/32" (7.7313mm) valve stem. Note: Special Order Product only. To order please contact your MCS sales representative.
Feuling
New

Feuling, valve guide OD cutter for 566045 seals

#707268

Stock:No

Cuts Spring Seat .550 ID x 1.180 - 1.185 OD. Used to cut spring seats for proper installed spring height and spring cup fitment. Cutter bodies and pilots are interchangeable. The hardened pilots fit all 3/8" and 1/2" hand drills. This cutter is designed for M8 cylinder heads using high lift camshafts. See Feuling M8 valve spring kits #993530 (565" lift, re-use upper spring collars) , 588021 (.565" lift, with titanium upper spring collars), 588022 (.600" lift). Note: The M8 cylinder head material under the valve spring seat pocket to the top side of the exhaust port is fairly thin even more so on ported cylinder heads. Cutter uses the following Pilots: 707265 Fits valve guides with 3/8" ( 9.53mm) valve stem, 48-83 Pan & Shovel 707263 Fits valve guides with 5/16" (7.9375mm) valve stem, 84-99 Evo; 99-04Twin Cam and 86-22 Evo XL 707264 Fits valve guides with 7mm valve stem, 05-17 Twin Cam 707262 Fits valve guides with 6mm valve stem, 17-up M8 707266 Fits valve guides with 11/32" (7.7313mm) valve stem Note: Special Order Product only. To order please contact your MCS sales representative.
Feuling
New

Feuling, valve spring seat cutter .550" ID x 1.180" OD

#707261

Stock:No

Cuts Spring Seat .625 ID x 1.565"OD. Used to cut spring seats for proper installed spring height and spring cup fitment. Cutter bodies and pilots are interchangeable. The hardened pilots fit all 3/8" and 1/2" hand drills. Cutter uses the following Pilots: 707265 Fits valve guides with 3/8" ( 9.53mm) valve stem, 48-83 Pan & Shovel 707263 Fits valve guides with 5/16" (7.9375mm) valve stem, 84-99 Evo; 99-04Twin Cam and 86-22 Evo XL 707264 Fits valve guides with 7mm valve stem, 05-17 Twin Cam 707262 Fits valve guides with 6mm valve stem, 17-up M8 707266 Fits valve guides with 11/32" (7.7313mm) valve stem. Note: Special Order Product only. To order please contact your MCS sales representative.
Feuling
New

Feuling, valve spring seat cutter .625" ID x 1.565" OD

#707258

Stock:No

Fits valve guides with 11/32" (7.7313mm) valve stem. Cutter bodies and pilots are interchangeable, Hardened pilots fit all 3/8 and ½ hand drills. Valve seat spring cutters: - 707258 .625" ID x 1.565" OD - 707259 .625" ID x 1.635" OD - 707260 .625" ID x 1.750" OD - 707261 .550" ID x 1.180" OD. Cutter uses the following Pilots: - 707265 Fits valve guides with 3/8" ( 9.53mm) valve stem, 48-83 Pan & Shovel - 707263 Fits valve guides with 5/16" (7.9375mm) valve stem, 84-99 Evo B.T.; 99-04 Twin Cam and 86-22 Evo XL - 707264 Fits valve guides with 7mm valve stem, 05-17 Twin Cam - 707262 Fits valve guides with 6mm valve stem, 17-up M8 - 707266 Fits valve guides with 11/32" (7.7313mm) valve stem. Valve guide OD cutters: Used to cut the valve guide outer to correct outer diameter. - 707268 .420" OD for Feuling seals 566045 (84-99 Evo Big Twin; 99-04 Twin Cam; 86-03 XL Sportster) - 707269 .500' OD for Feuling seals 566048 (.500" OD guides with 5/16" stems) - 707270 .530" OD for Feuling seals 566047 (H-D with Screamin' Eagle cylinder heads with .530" OD guides with 5/16" stems). Note: Special Order Product only. To order please contact your MCS sales representative.
Feuling
New

Feuling, pilot for valve spring seat cutter, 11/32"

#707266

Stock:No

Machine valve spring seats for proper installed spring height and spring cup fitment. Cutter bodies and pilots are interchangeable, Hardened pilots fit all 3/8 and ½ hand drills. Cutter: Cuts Spring Seat .625 ID x 1.750 - 1.755 OD Cutter uses the following Pilots: 707265 Fits valve guides with 3/8" ( 9.53mm) valve stem, 48-83 Pan & Shovel 707263 Fits valve guides with 5/16" (7.9375mm) valve stem, 84-99 Evo; 99-04Twin Cam and 86-22 Evo XL 707264 Fits valve guides with 7mm valve stem, 05-17 Twin Cam 707262 Fits valve guides with 6mm valve stem, 17-up M8 707266 Fits valve guides with 11/32" (7.7313mm) valve stem Note: Special Order Product only. To order please contact your MCS sales representative.
Feuling
New

Feuling, valve spring seat cutter .625" ID x 1.750" OD

#707260

Stock:No