20 of 52 search results

SORT ON:

Lost or broke your screw-on adapter for your compression tester? - Used between the tubing of a compression tester/leak down tester and the cylinder head - With 5/16" / 8mm sized hose end - Threaded end is 12mm x 1.25 - Fits most 12mm threaded cylinder heads
MCS
New

MCS, adapter compression tester. 12mm

#987925

Stock:Yes

For models equipped with a Euro V 6-pin diagnostic port. Used with MCS Scan 560041. Sold to dealers only. Note: 996456 is the one-piece replacement Euro 5 connector cable for the now discontinued 934364 cable
MCS
New

MCS Scan, connector slave cable. Euro 5 (6-pin)

#996456

Stock:Yes

3-LED real time voltage info. Used in racing applications where a charging system is not present. This way the three built-in LEDs gives clear information about the battery voltage conditions at any time. Dimensions 28mm x 42mm x 12mm.
Dynatek

Dynatek, voltage monitor

#903352

Stock:Yes

Used to check and measure cylinder leakage on 4-stroke motorcycles. Works on an air compressor. Comes with dual gauges, a 35 PSI pressure gauge and a 0-100% percentage gauge. Fits spark plug holes of 14mm std, 14mm long and includes 12mm and 10mm adapters. Packed in a sturdy blow molded carrying case.
Lang Tools

Lang Tools, dual gauge leak down tester

#517193

Stock:No

- Can be used with 938067 Motion Pro cooling system test tool. - Type-A adapter, designed to work on radiator necks ranging from 20 mm - 25.5 mm. - Used to measure your radiator neck to confirm correct size for your application. - Specified range is most commonly found on Japanese manufactured radiators, 2016 and up KTM, and can also be found on some late model water-cooled American V-Twins. - Adapter only.
Motion Pro

Motion Pro, type B adapter for cooling system tester

#938065

Stock:Yes

- Motion Pro designed test tool to pressurize motorcycle or ATV cooling system to check for leaks. - Tests radiator and radiator cap for leaks and correct pressure release limit. - Use with a common hand pump to pressurize a non-running system (pump not included). - Unique design allows you to test the cooling system on a running engine to check for leaks or excessive pressure when system is hot. - Remote, accurate, easy to read gauge makes readings and diagnosis easy. - Unique radiator adapter will work with most motorcycle, ATV and UTV applications equipped with a 30 mm spout. - Measure your radiator neck to confirm correct size for your application. Note: A common hand pump, to pressurize a non-running system, must be used on a non-running engine. This pump is not included. Note: See 938064 for type-A adapter to measure your radiator neck to confirm correct size for your application.
Motion Pro

Motion Pro, cooling system test tool. Type A

#938066

Stock:Yes

- Motion Pro designed test tool to pressurize motorcycle or ATV cooling system to check for leaks. - Tests radiator and radiator cap for leaks and correct pressure release limit. - Use with a common hand pump to pressurize a non-running system (pump not included). - Unique design allows you to test the cooling system on a running engine to check for leaks or excessive pressure when system is hot. - Remote, accurate, easy to read gauge makes readings and diagnosis easy. - Unique radiator adapter will work with most motorcycle, ATV and UTV applications equipped with a 30 mm spout. - Measure your radiator neck to confirm correct size for your application. Note: A common hand pump, to pressurize a non-running system, must be used on a non-running engine. This pump is not included. Note: See 938065 for type-B adapter to measure your radiator neck to confirm correct size for your application.
Motion Pro

Motion Pro, cooling system test tool. Type B

#938067

Stock:Yes

- Can be used with 938066 Motion Pro cooling system test tool. - Type-A adapter, designed to work on radiator necks ranging from 15.75 mm - 20 mm. - Used to measure your radiator neck to confirm correct size for your application. - Specified range is most commonly found on Japanese manufactured radiators, 2016 and up KTM, and can also be found on some late model water-cooled American V-Twins. - Adapter only.
Motion Pro

Motion Pro, type A adapter for cooling system tester

#938064

Stock:Yes

Motion Pro

Motion Pro, Digital 4-Stroke leak Down tester

#954455

Stock:Yes

With metal probe to find the origin of engine noise
Jims

JIMS, mechanic's stethoscope

#978452

Stock:Yes

For 4-stroke engines; For14 & 18mm spark plug threads; incl. 12mm & 10mm adapters
Jims

JIMS, dual gauge leak down tester

#961581

Stock:Yes

For MCS Scan 560041. Sold to dealers only.
MCS

MCS Scan, connector cable

#963298

Stock:Yes

For MCS Scan 560041. Sold to dealers only.
MCS

MCS Scan, connector cable

#560049

Stock:Yes

For MCS Scan 560041. Sold to dealers only.
MCS

MCS Scan, connector cable

#560075

Stock:Yes

For MCS Scan 560041. Sold to dealers only.
MCS

MCS Scan, connector cable

#560089

Stock:No

For MCS Scan 560041. Sold to dealers only.
MCS

MCS Scan, connector cable

#560045

Stock:No

For MCS Scan 560041. Sold to dealers only.
MCS

MCS Scan, connector cable

#560079

Stock:Yes

For MCS scan 560041, injection regulation, sold to dealers only
MCS

MCS Scan, connector cable

#560083

Stock:Yes

For MCS Scan 560041. Sold to dealers only.
MCS

MCS Scan, connector cable

#560082

Stock:Yes

For MCS Scan 560041. Sold to dealers only.
MCS
Discontinued

MCS Scan, connector cable

#560076

Stock:No