Workshop - Vtwin-tools - Maintenance

Brand name

10

Segment

4

Material

4

Size

2

Color

4

Tags

2

20 of 31 search results

Sort on:

SORT ON:

- Used to pull bearings that you can't reach from the rear side
- Includes 8, 10, 12, 15, 17, 20, 25, 30, and 35 mm collets
- Collets are precision machined for perfect fit and durable performance
- Collets have a innovative new design that improves durability and pulling strength
- Pull tests in our lab show our collets are 2x to 3x stronger than conventional collets
- Kit includes high quality slide hammer with excellent weight and balance

Motion Pro, blind bearing remover kit

#701699

Stock:Yes

Used to give drive belts correct pre-tension. Insufficent tension or over-tension may damage drive belts. For all belt drive models with a 10 lbs specification. Spring operated. With scaled gauge for easy reference.

MCS belt tension tool

#999357

Stock:Yes

Used to remove OEM style 62700280 spin-on oil filter on Revolution Max engines.
3/8" drive, 15 flats.
Manufactured from T6061 aluminum.

MCS, oil filter wrench RH/RA

#998140

Stock:No

For 547090 chain breaker tool

Motion Pro, repl. body bolt

#547094

Stock:Yes

Handmade from genuine heavy duty leather for strength and endurance. Installs to the bike with ease. The special water resistant suede ensures that weather will have little effect on the bag. Here’s what spaces it contains: 6 slots for Allen keys (hex keys), 10 slots for spanners / wrenches, 4 additional slots for pliers/ screw drivers and a zipper pocket for the rest.
Dimensions closed: 17cm diameter x 27cm long.
Dimensions open: 43cm high x 27cm wide.

Trip Machine Tool roll tobacco / vintage tan

#995595

Stock:Yes

Optional for 547095 Jumbo chain tool. It perfectly complements this tool to retain the factory quad stake look. Safely and properly peens soft-nose-type master link pin tip.

Motion Pro, quad stake rivit kit

#547098

Stock:Yes

Replacement press plate set for 500508 Chain Breaker & River kit and 547101 Chain Press Tool kit

Motion Pro, chain press plates

#547102

Stock:Yes

Fits most 520/530 chains, incl. o-ring. Includes hex key wrench. USA made. Since about 1990 most non-rivited chains use press-fit type sideplates on the masterlink. This type link requires a special side plate press-tool for side plate installation.

Motion Pro, press-fit chain link tool

#547100

Stock:Yes

Breaks & rivets all 420 to 630 chains on-bike with hollow nose master link pins. Includes a small pin to service 420 series chains.

Kellermann, chain tool kit

#934849

Stock:Yes

KTM orientated. Extra attention was paid to Adventure and Duke but all KTM's are covered, for both on and off road needs as basic service. Includes standard tool kit items, only required sizes, including combination wrenches, locking pliers, 6-in-1 screwdriver, hex, star wrenches and rachet wrench. A 27mm x 32mm combo wrench for most rear and many front axles. Tools are pro-grade and organized into a tough roll-up pouch.

Cruztools, RoadTech™ KT1 for KTM motorcycles

#559609

Stock:No

Kit includes the following:
- A high pressure hose, M10 x 1.00 male, 8 x 300 mm.
- An angled spout, M10 x 1.00, 150 mm.
- A hydraulic coupler, M10 x 1.00 female.
- A Hollow/universal coupler, for H- and K-nipples, M10 x 1.00 female.
- A funnel type coupler, M10 x 1.00 female, for funnel type grease nipples.

Pressol grease gun accessory set, M10 x 1.00

#599712

Stock:Yes

For use with 400 gram grease cartridges, according to DIN 1284.

Pressol, follower plate grease cartridge

#599717

Stock:Yes

Replacement pin for 547095 Jumbo Chain Tool

Motion Pro, jumbo chain tool repl. pin

#547096

Stock:Yes

Breaks 520 up to 630 chains. Rivets up to 530 chains.
Presses masterlink sideplates up to 530 chains.
Extractor pin is guided by a removable guide, for long pin life.
Can be bolted to workbench, bolted to vice or held by handle.
When bolted to workbench airtools can be used to break chain.
Recommended for heavy-duty use.
Note: Great to use with the Motion Pro 547098 Quad Stake Rivet Kit
Note: For replacement parts see 547096 (pin) and 547087 (spring).

Motion Pro, jumbo chain tool

#547095

Stock:Yes

Fits all regular 76mm oil filters with 14 flats. For 3/8" drive or 15/16" socket. Strong one-piece construction, from one-piece aircraft quality 6061 aluminum. Will not deform and always give a good, snug fit. With cut-out to clear crank position sensor.

Evolution Industries, oil filter wrench

#552106

Stock:Yes

Installs & removes regular spin on oil filters with 76mm diameter and 14 flats; 3/8" drive

JIMS, oil filter wrench

#978475

Stock:Yes

Handmade from genuine heavy duty leather for strength and endurance. Installs to the bike with ease. The special water resistant suede ensures that weather will have little effect on the bag. Here’s what spaces it contains: 6 slots for Allen keys (hex keys), 10 slots for spanners / wrenches, 4 additional slots for pliers/ screw drivers and a zipper pocket for the rest.
Dimensions closed: 17cm diameter x 27cm long.
Dimensions open: 43cm high x 27cm wide.

Trip Machine Tool roll black / black

#995596

Stock:Yes

Keep the crap out of your engine while oil filter is removed. O-ring sealed with transfer ports that allow oil flow if engine is turned over with cover installed.

9Finger Fabrication, oil filter cover

#998417

Stock:Yes

Iridium (yellow zinc) plated; With cut-out to clear crank position sensor on Twin Cam; Installs & removes all regular spin on oil filters with 76mm diameter and 14 flats

Oil filter wrench, 3/8" drive with cut-out

#910641

Stock:Yes

Extra slim for easier access; Great for H-D with round crankcase position sensor; Fits 76mm filters with 14 flates; 3/8" drive

JIMS, Slim JIMS oil filter wrench

#962020

Stock:Yes