17 of 17 search results

SORT ON:

- Quickly and easily adjusts rear shock compression and rebound - Portable design allows for convenient trackside or trailside adjustments - Fits common 14 mm high speed compression adjusters - Made from durable stainless steel and anodized 6061-T6 aluminum
Motion Pro
New

Motion Pro, ShockSetter™ 14mm compression and rebound tool

#701701

Stock:Yes

- Quickly and easily adjusts rear shock compression and rebound - Portable design allows for convenient trackside or trailside adjustments - Fits common 12 mm high speed compression adjusters - Made from durable stainless steel and anodized 6061-T6 aluminum
Motion Pro
New

Motion Pro, ShockSetter™ 12mm compression and rebound tool

#701700

Stock:Yes

Fits most adjustable single shocks; Used to adjust preload of the shock absorber spring
Progressive Suspension

Progressive Suspension, preload shock spring wrench

#974076

Stock:Yes

Allows you to safely compress the spring of the rear shock absorber to install any brand lowering kit. Compatible all shocks, with or without preload adjustment knob. Comes as kit, including the compression tool, 4 nuts, pin and instructions.
Killer Custom

Killer Custom, shock / spring compression tool M8 Softail

#955115

Stock:No

Universal compact shock spanner; 3/8" drive
Progressive Suspension

Progressive Suspension, preload shock spring wrench

#974077

Stock:Yes

Used to adjust preload of the shock absorber spring; 3/8" drive
Progressive Suspension

Progressive Suspension, preload shock spring wrench

#974078

Stock:Yes

Early H-D style, pliers type wrench; Used to adjust preload. Replacement for OEM 94700-52C tool.
MCS

Shock absorber wrench

#513760

Stock:Yes

Used to adjust pre-load of shock absorber springs; with 3/8" drive
MCS

Shock absorber wrench

#914216

Stock:Yes

Used to install or remove springs on rear shock absorbers; Works with both single or twin-spring shocks
Progressive Suspension

Progressive Suspension, spring compressor

#974074

Stock:Yes

Early style, pliers type wrench shock adjuster. Used to adjust spring tension pre-load of rear shocks as used on most models swingarm frames. Replacement for OEM Repl. 94700-52C tool.
MCS

MCS, shock absorber wrench

#925510

Stock:Yes

This is a front fork & rear shock absorber maintenance tool. It is used to securely hold the front fork slider for maintenance like oil & seal change. It also will hold the rear shock absorber, on body, shaft or shock reservoir, for maintenance work like spring, piston rod, seal head removal etc. - Designed to make suspension service simple and quick. - Holds shocks and forks securely while you change oil, re-valve, or change seals. - Pivoting head holds parts in any position, with mechanical stops every 45 degrees. - Aluminum Soft Jaw Vise holds cylindrically shaped parts utilizing a 4 point grip system. - Large side holds 40 mm to 61 mm diameter parts. - Small side holds 16 mm to 34 mm diameter parts. - Steel Frame is rigid yet has a small footprint, with 4 pre-drilled holes in the base for secure mounting to a workbench. - Movable fluid catch pan with mesh insert, and threaded drain bung. - HOW IT WORKS ON FORKS - - Soft Jaw Fork Peg holds fork slider up for removal of dust seal and seal retaining clip. - Repositionable bottom slide bar holds forks compressed while bleeding air (priming cartridge) during reassembly and is an excellent platform for adding, adjusting and taking fork oil level measurements. - Can be used to assist in removing compression valve assembly (use of stock front axle required). - HOW IT WORKS ON REAR SHOCK ABSORBERS - - Holds shock firmly around shock body, shaft or shock reservoir. - Facilitates removal of piston rod and seal head. - Facilitates removal of shock reservoir caps, chamber pistons or bladder. - Holds shock to remove spherical bearings or needle bearings. - Holds shocks for removal of shock spring.
Motion Pro

Motion Pro, Pivot suspension vise tool

#937661

Stock:No

Used to compress the spring of the M8 Softail rear shock absorber. Allows a safe compression, removal and installation of the spring or lowering kit. Compatible with all M8 rear shocks, with or without preload adjustment knob.
Kodlin

Kodlin, M8 Softail shock/spring compression tool

#963489

Stock:Yes

Used to adjust spring preload
MCS

Shock absorber wrench

#914213

Stock:Yes

'- Designed for removal and installation of shock reservoirs, screw-in seal heads, fork caps, and bearing retainers. - Freely pivoting arms span a range of 10.5 mm to 150 mm. - Interchangeable 3, 4 and 5 mm hardened steel pins with a black oxide coating. - Integrated 3/8" square drive for use with a breaker bar or torque wrench. - Curved, low profile arms easily fit tight areas. - Billet heat treated steel construction for increased strength, rigidity and durability. - Durable black oxide finish with laser engraved markings. - Maximum torque rating of 70 lbs-ft. Note: Replacement pins available as 937999.
Motion Pro

Motion Pro, heavy duty pin spanner

#937998

Stock:Yes

Used to adjust pre-load of shock absorber springs
MCS

Shock absorber wrench

#914205

Stock:Yes

Designed for use with with Mueller 588736 and 588737 lowering kits for M8 Softails, but can be used for to install any brand lowering kit. The shock is securely clamped into the press for a safe spring hold. All required steps can easily be carried out for a quick and easy installation of the lowering kit.
Müeller

Müller, M8 shock spring compressor tool

#591263

Stock:Yes

Stainless steel; Small compact universal shock spanner; Dimensions: approx. 16cm long
Cruztools

Cruztools, shock absorber wrench

#550138

Stock:No