20 of 105 search results

SORT ON:

Used to install main drive gear inner & outer bearing on 6-speeds. Also installs main drive gear seal. Transmission must be removed from bike
MCS
New

MCS, 6-speed main drive gear bearing tool

#987927

Stock:Yes

Used to ream main drive gear bushings to factory specifications
MCS

Adjustable reamer, maindrive gear

#530862

Stock:Yes

Used to ream kick start shaft bushings (33288-37, 2127-37A) to factory specs.
MCS

Adjustable reamer, kickstart shaft

#530863

Stock:Yes

Used to remove & install the large (regular right hand threaded) nut that holds the transmission pulley or transmission sprocket on the transmission mainshaft. Works with both belt & chain drive models. 1/2" drive. One-piece, no-welds narrow body to prevent mass and give maximum effectivity of air impact wrenches. Compatible with all OEM style Cruise Drive 6-speed transmissions.
Evolution Industries

Evolution Industries, transm. sprocket/pulley nut wrench

#552104

Stock:Yes

Used to remove & install the large 1-7/8" (left hand threaded) nut that holds the transmission pulley or transmission sprocket on the transmission mainshaft. Works with both belt & chain drive models. 1/2" drive. One-piece, no-welds narrow body to prevent mass and give maximum effectivity of air impact wrenches. Compatible with all 4 and 5 speed and most non-stock aftermarket 6-speed versions for these years.
Evolution Industries

Evolution Industries, transmissio sprocket/pulley nut wrench

#552103

Stock:Yes

Used to pull the main drive gear bearing straight from the transmission case, without damage or removing the case from the frame
Jims

JIMS, 5-speed transmission main bearing puller

#978360

Stock:Yes

Used instead of rags. Provides enough plugs to fully seal all Twin Cam and transmission holes to prevent dirt and dust from entering while it is apart during a rebuild or repair.
Jims

JIMS, engine & transmission plug kit

#962014

Stock:Yes

Used to remove 5-sp transm. trapdoors. Pulls door, with gears and shafts attached. No scratches, damage or frustrations. Puller will not damage door bearings. Note: Also fits most custom 6-speed transmissions.
Jims

JIMS, 5-sp transm. door puller

#978366

Stock:Yes

Used to install maindrive gear bearing OEM 8905 (L77-81 4-sp B.T.) or OEM 8906 (82-86 4-sp B.T.) to proper factory depth
Jims

JIMS, transm. maindrive gear bearing tool

#978357

Stock:Yes

Used to main bearing and main drive gear, without removing the transmission case from the frame, on 6-speed B.T. models.
Jims

JIMS, 6-sp maindrive gear remover tool

#961552

Stock:Yes

Used to remove the transmission access cover which has a press-fit on two dowel pins
Jims

JIMS, XL transmission access cover puller

#978363

Stock:Yes

Used to install bottom transm. case mount studs in stock and all aftermarket transmission cases
Jims

JIMS, transmission stud installer tool

#978369

Stock:Yes

1.870" cast iron
Eastern

Lap head, transmission lapping tool

#512904

Stock:Yes

1.870" cast iron
Eastern

Lap head & pilot, transmission lapping tool

#512907

Stock:Yes

With nuts & spacers
Eastern

Lapping shaft, transmission lapping tool

#512914

Stock:Yes

1.300" cast iron
Eastern

Lap head, transmission lapping tool

#512903

Stock:Yes

Replacement for all 512901, 512902 and 512906 lapping tool kits
Eastern

Drive handle & arbor

#512916

Stock:Yes

Replacement for all 512901, 512902 and 512906 lapping tool kits
Eastern

Spanner wrench

#512912

Stock:Yes

Eastern

Transmission lapping tool kit

#512902

Stock:Yes

1.300" cast iron
Eastern

Lap head & pilot, transmission lapping tool

#512908

Stock:Yes